When Maxspect Coral Putty first came across our review desk, we didn’t think much of it as we’re not the biggest fans of typical 2-part epoxy. However while doing some unconventional aquascaping yesterday the Coral Putty really demonstrated how incomparable it is to the AquaStik and HoldFast tubes of olden days.
The collective distaste for epoxy putties is well deserved since the typical grey or pink stuffbarely在几乎所有用例场景中都可以使用 - 很难使用,永远需要完全混合,甚至更长的时间才能真正治愈。然后,当它最终设置了环氧树脂时,通常会击败为什么首先使用它的依恋目的。再加上它留在我们手上的残留物,干扰蛋白质会导致它引起的蛋白质,并且随着时间的流逝而崩溃和崩溃的趋势使两部分的环氧树脂腻子只有在最后一个沟渠场景中有用。
With all of these detractions going for it, you can’t blame us for not having any epoxy putty around, but we did have some Maxspect Coral Putty and decided to give it a try with very low expectations. If this putty was anything like normal epoxies we wouldn’t be telling you about it but the Maxspect putty is nothing like we expected, not even close.
这种基于硅的腻子非常柔软,使它very easy to knead and mix up, it starts curing very quickly, and hardens lightning fast – you’ve got 90 to 120 seconds from the start of mixing to initial curing. The Maxspect Coral Putty started curing and hardening so fast that it took us by surprise and we had to adjust by mixing up much smaller amounts of it at a time. Since it starts out kneading very softly it is much easier to press between rocks and since it hardens so quickly, you don’t have to hold whatever rock or coral you’re trying to join for that long.
虽然揉捏的激活过程非常快,但最好的部分是基于硅酮的油腻实际上可以固化成一种非常坚硬的状态,但不会收缩。如果您由于完全治愈时的收缩和破裂而注销了旧派环氧树脂油灰,那么您会惊讶地看到Maxspect Coral Putty如何进入,并与触摸的任何东西都非常紧密。
几年前,我们写下了两部分的环氧树脂推杆,但Maxspect Silicone-Base版本是完全不同的动物。我们真的不相信这种油腻的效果会像它一样有效,但是既然我们已经看到了它的作用,我们将始终将其中的一些用于蓄水,快速修复,并附上更大的珊瑚和殖民地。[[Maxspect这是给予的